|
Option Code
|
Description
|
|
00
|
Standard EMS Wiring Package
|
|
02
|
Exhaust on in Fire
|
|
28
|
Exhaust on in Fire, Connection for Fan activated Gas Valve Reset Relay
|
|
47
|
2 (18) amp contactors on with fan switch, exhaust on in fire
|
|
83
|
Exhaust on in Fire, Lights Out in Fire
|
|
E2
|
Exhaust on in Fire, Lights Out in Fire, Connection for Fan activated Gas Valve Reset Relay
|
|
EG
|
Cooling Thermostat and Relays to control Condenser. Exhaust on in Fire
|
|
H8
|
Exhaust on in Fire, Duct Stats in risers to trigger alarm and trigger shunt trip at 212 deg F, Audible Alarm
|
|
HK
|
Exhaust on in Fire, Lights out in Fire, Audible Alarm
|
|
JT
|
Outside Air Damper Control with Exhaust on in Fire (0-10VDC signal & Condensing unit Stage two interlock)
|
|
MR
|
Panel accepts a 120V signal to start fans. No fan switches supplied. Works with ESP, AM-2 and TAC unit. Exhaust on in Fire
|
|
NG
|
Exhaust in Fire, Exhaust and Supply Proving, Connection to Heater
|
|
NM
|
Exhaust on in Fire, 2 Starters ON with fan switch and ON in Fire
|
|
NZ
|
SCS Panel Connection, Exhaust on in Fire. Relay to start fan and Relay for Wash Cycle Fan interlock
|
|
W4
|
Hot Water Wash with Exhaust on in Fire
|
|
W7
|
Hot Water Wash and OAD Control with Exhaust on in Fire (W4 + JT)
|
|
WB
|
Hot Water Wash with Exhaust on in Fire and Lights Out in Fire
|
|
WE
|
CORE PROTECTION with Hot Water Wash and Exhaust on in Fire
|
|
WL
|
Hot Water Control, Exhaust in Fire. Controls only. Use with AM-2 M40 Panel
|
Sign In
The modulation of the fans between low and high speed is adjusted by variable frequency drives. The use of variable
frequency drives allows for a 20% reduction in airflow at the appliance idle temperature. The modulation of the fans
during cooking operation allows for maximized energy savings versus a fan running on high speed during the same
cooking period.
